Basic Kit

Il Basic Kit si compone dei seguenti elementi:

Rex O-3-B

• Standalone controllers with built-in proximity cards reader
• Real time clock and RS-485 communication
• For smaller, price oriented access control systems
• Designed for both private and residential buildings, hotel rooms, offices, shops and garages, etc.
• For opening doors, barriers, gates, lifts, for switching on/off alarm systems, etc.
• Suitable for mounting outdoors
• Internal memory for 1000 cards or codes / 10.000 events
• Anti-tamper alarm
• In standalone mode set-up can be made with a master card or master code, in advanced mode access control software (Blocker, Codeks) must be used
• Optional conversion to an advanced reader with 26-bit Wiegand output

• Dimensions 58x120x15 mm (Rex O-3-B)
• Reading frequency: 13,56 MHz and Reading range: up to 7 cm
• Internal memory for 1000 cards or codes / 10.000 events
• IP65 protection
• External power supply 9 to 14 V DC (Spider W5, Spider W5-B, Spider W40, Spider W40-B)
• Door status and push button inputs and Door strike transistor output (0,5 A)
• Built-in accelerometer (anti-tamper alarm)
• Operating temperature: from -20° to +50°C and Current consumption: up to 0,1 A
• LED and buzzer for door status signalization
  with 8×0,22 alarm cable (3m) 

SPIDER W5-B

• 10 W power supply with built-in communication converter for standalone access controllers Rex or time & attendance controllers Regis
• Communication converter for multiple access controllers Populus in a single RS-485 communication line
• RS485-TCP/IP or RS485-USB communication converter
• Powerful enough to power one standalone controller and one DC door strike or electromagnetic lock
• Pluggable connectors (RS-485 communication line and power output)
• RJ-45 and USB micro sockets

• Dimensions: 120x80x33 mm
• Operating voltage: 230 V AC
• Output: 12 V DC, 0.8 A
• Primary fuse: F100, 250 V 0.25 A
• Secondary fuse: F101, 16 V 1.1 A, resetable
• Pluggable connectors
• RJ-45 connector
• USB micro connector
• Power consumption: less than 1W + load
• Operating temperature: +5 to +40°C
• LED status notification

BLOCKER SOFTWARE

• For very basic, standalone controllers based access control solutions (for example: one or few Rex standalone controllers on the same location)
• Blocker was developed for the users, who don’t need advanced settings – for instance private customers, security companies, installers or managers of the apartment or office buildings
• Simple and user friendly interface
• Blocker is mentioned for fast and easy set-up of the communication between controller(s) and computer and for setup of the controllers
• Easy assignment of the access rights and enrolment of user cards and PIN codes
• Events log
• Blocker supports not only standalone controllers from Rex family (with exception of fingerprint reader Rex F), but also advanced access controllers (Populus), but with limited functionality

• A PC running Windows 7 or later
• A USB port or Ethernet (LAN) port for connection with hardware
• Display with at least 1280×1024 resolution
• Installed Microsoft .NET Framework 4.00 Extended (Client profile is not sufficient)
• Minimum 1GB RAM (recommended 2GB or more)
• PDF Reader for creating of the report

20 CARDS